Display Assembly - HP Probook 5320m Maintenance And Service Manual

Display assembly

✎
The display assembly spare part kit includes 2 WLAN antenna transceivers and cables, 2 WWAN antenna
transceivers and cables, webcam, nameplate, and logo.
Description
13.3-in, HD, LED, AntiGlare display assembly
13.3-in, HD, LED, BrightView display assembly
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Accessory cover (see
b. Keyboard (see
c. Button board and cable (see
d. Top cover (see
e. System board (see
Remove the display assembly:
1. Remove the WLAN and WWAN antenna cables 1 from the clips 2 built into the base enclosure.
Maintenance and Service Guide
"Battery" on page
"Mass storage device" on page
"Keyboard" on page 4-23)
"Button board and cable" on page
"Top cover" on page 4-28)
"System board" on page
4-7).
4-9)
4-26)
4-33)
Removal and replacement procedures
Spare part number
618827-001
618828-001
4–43