Top Cover - HP Probook 5320m Maintenance And Service Manual

Removal and replacement procedures

Top cover

Description
Top cover with fingerprint reader (includes TouchPad button board and cable, and TouchPad board
and cable)
Top cover with no fingerprint reader (includes TouchPad button board and cable, and TouchPad
board and cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Accessory cover (see
b. Keyboard (see
c. Button board and cable (see
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the following screws:
❏
Three Torx T8M2.5×5.0 screws 1 in the battery bay
❏
Three Torx T8M2.5×6.0 screws 2 in the mass storage device bay
❏
Two Torx T8M2.5×9.0 screws 3 in the RTC battery compartment
4–28
"Battery" on page
"Mass storage device" on page
"Keyboard" on page 4-23)
"Button board and cable" on page
4-7).
4-9)
4-26)
Spare part number
618840-001
618841-001
Maintenance and Service Guide