How To Setup/Access The Camera Remotely - TRENDnet TV-IP751WC User Manual

TRENDnet User's Guide

How to setup/access the camera remotely

You can either setup the Dynamic DNS connection via camera itself or your home
router. An account from any of the listed DDNS providers is required prior to this
operation.
Configure DDNS on your Camera
1. Go to Camera's DDNS Setting page, click Enable to activate the feature. Then
select a DDNS provider from the list.
2. Enter your DDNS's the Host Name, User Name and Password.
3. In the Port Number section, assign an HTTP port of the camera. The default
HTTP Port on the camera is 80. The example shows above is using port number
9000.
© Copyright 2012 TRENDnet. All Rights Reserved.
4. Open another web browser and go to your Router's Web Configuration page.
(In the example, TRENDnet's TEW-651BR Wireless N router is used)
5. Go to Virtual Server* section and create a new entry.
Enable: Click Enable
Name: Enter the application name (eg. CameraName)
Protocol: Select TCP
Private Port: The HTTP port that you assign on your Camera.
Public Port: The port used on remote side to access to your Camera.
LAN Server: The local IP address of your Camera.
TV-IP751WC/ TV-IP751WIC
32