Configuration; Viewing Video - TRENDnet TV-IP751WC User Manual

TRENDnet User's Guide

Configuration

After completing the Setup Wizard, you are ready to use your camera. The
camera's built-in Web configuration utility is designed to allow you to easily access and
configure your TV-IP751WC and TV-IP751WIC camera. Open a web browser such as
Internet Explorer® and enter the IP address of your camera. To log in, use the
Username "admin" and the Password created in the Setup Wizard. If you did not create
a password, the default Password is admin. You will then be prompted to change the
default password, admin. After entering your password, click OK.
The home page for the TV-IP751WC and TV-IP751WIC appears.
© Copyright 2012 TRENDnet. All Rights Reserved.

Viewing Video

Click VIEW VIDEO | ACTIVEX or VIEW VIDEO | JAVA to begin viewing live video from
your camera.
VIEW VIDEO | ACTIVEX
Windows users who do not have Java installed can choose ActiveX mode to view video.
Internet Explorer will prompt you to install ActiveX when you click on the VIEW VIDEO |
ACTIVEX link. Mac users must use the Java mode to view video.
TV-IP751WC/ TV-IP751WIC
18