Network - TRENDnet TV-IP751WC User Manual

TRENDnet User's Guide
adapter on the TV-IP751WC or TV-IP751WIC connected to a wireless
adapter on the PC.

SSID: Service Set Identifier. This is an identifier for your network. Manually
enter the SSID of your wireless network or select it from the drop down menu.
You can click Site Survey to see a list of wireless networks within range and
further details of their settings.

Wireless Channel: When using Infrastructure mode, the channel is specified by
the access point and the channel will not be selectable on this menu. When
using Ad-Hoc mode, you can specify on which channel you want to
communicate with the camera.

Encryption Type: It is highly recommended that you encrypt the connection. In
Infrastructure mode, select an encryption type and enter details where
applicable as you have specified on the access point. If you intend to use Ad -
Hoc mode, you can specify here the encryption type and pre-shared key that
you want to use to connect from the PC.
© Copyright 2012 TRENDnet. All Rights Reserved.

Network


IP Address Mode: Choose a method to assign an IP address to your camera.
o
Fixed IP – If you want to assign a static or fixed IP address to the
camera, you may do so here. Your network administrator should be
able to provide you with the necessary details to complete this
section.
o
Dynamic IP (DHCP) – Allows a DHCP server to automatically assign the
camera a network address.
o
PPPoE – If you are using a PPPoE connection, enter your user name
and password here

Dynamic IP: Enter the Domain Name Server addresses which translate names
to IP addresses.
TV-IP751WC/ TV-IP751WIC
23