Video; Audio; Wireless - TRENDnet TV-IP751WC User Manual

TRENDnet User's Guide

Video


Video Resolution: Select from one of the three resolutions. Higher values
provide better quality but at the expense of higher bandwidth requirements on
your network or internet connection.

Compression Rate: Select a compression rate. Higher rates of compression will
reduce network load at the expense of lower image quality.

Frame Rate (Frames/Sec.): Select the number of frames per second you would
like for your video. Higher rates provide smoother video but require more
bandwidth on your network or internet connection.

Brightness Control: Allows you to control the brightness level. Enter a value
between 1 and 128.

Contrast Control: Allows you to control the contrast level. Enter a value
between 1 and 128.

Saturation Control: Allows you to control the saturation level. Enter a value
between 1 and 128.

Light Frequency: Select the correct frequency (50Hz/60Hz) to reduce the
amount of flicker.

Mirror: Choose whether to mirror the image horizontally or vertically.

Anti-Flicker: Check the box to enable anti-flicker.
© Copyright 2012 TRENDnet. All Rights Reserved.

Audio


Audio: Choose whether to Enable or Disable the camera audio feed.

Volume: Select the volume percentage level.

Wireless


Connection Mode: Infrastructure is a wireless connection using an access point
as a transmission point of all wireless devices. Ad-Hoc is a wireless connection
used without an access point, where your TV-IP751WC or TV-IP751WIC is
directly connected to your PC. This is done using the on-board wireless
TV-IP751WC/ TV-IP751WIC
22