Creating Frames
When you first prescan your document, SilverFast Lite places a default
frame (the dotted line) around the border of the entire scan area. If the
Original setting is set to Reflective, the scan area is the entire document
table (8.5
11.7 inches). If you select Transparency or Neg.
Transparency, the entire scan area is 4
5. If you selected Spectra
Polaroid, the maximum scan area is 4
3.5 inches. If you selected 600
Polaroid, the maximum scan area is 3.5
3.5 inches. (See
Choosing the
Original Document Type
for details on these settings.)
frame border
If you want to crop and scan only one area on one image, you can adjust
the default frame to the size you want. See
Resizing and Moving Frames
for instructions.
Basic Scanning
Page 24