Scanning Multiple Images - Epson Expression 800 User Manual

You can't switch
between frames if
you've zoomed in on a
frame. Zoom out from
the selected frame
before creating or
changing frames;
see Framing for
instructions.
To stop a batch scan
in progress, click
Cancel. When you
access SilverFast Lite
again, it continues
batch scanning with
the next frame. Click
Cancel as necessary
until all the frames in
the batch scan are
cancelled.
Advanced Scanning

Scanning Multiple Images

To scan multiple images:
1 Place the original(s) to be scanned on the scanner document table.
2 Click the Prescan button.
3 Select one of the following from the Scan Mode list: Batch Mode (to
import images into your application) or Batch Mode Tiff (to scan
images into TIFF files).
If you select Batch Mode Tiff, you see a prompt to enter the path and
the file name to save to. The files will be sequentially numbered based
on the name you enter here. Type the name and click Save.
4 Click and drag the mouse to create a frame around each image or
portion of an image. See
adjusting frames. Make sure you select the settings you want to use for
each frame before you create the next.
5 Click the Scan Batch or Scan Tiff button to scan all the framed
images sequentially.
If you selected Batch Mode, each frame is automatically scanned into
your application and assigned a temporary window name (sequentially
numbered). You see a Batch End message when batch scanning is
finished. Click OK.
If you selected Batch Mode Tiff, each frame is automatically scanned
into a temporary file on your hard disk, numbered sequentially based
on the name you entered in step 3.
6 Click the Quit button to exit SilverFast Lite and return to your
application.
Framing for instructions on creating and
Page 37