Moving Between Frames - Epson Expression 800 User Manual

If you're creating
multiple frames for
batch scanning, select
the settings for one
frame before creating
another (see Batch
Scanning for details).
You can copy settings
from the active frame
to another frame by
holding down the Alt
key (Windows) or the
option key
(Macintosh) and
clicking the target
frame.
To view the frame
numbers of each
frame (on the
Macintosh only),
press the control key.
Basic Scanning
The new frame border is a dotted line, indicating that it is the active frame.
Any other frame borders become solid lines.
inactive frame
borders shown
by solid line
To duplicate the active frame, hold down the Alt key (Windows) or the
option key (Macintosh) and click in the upper left corner of where you
want the new frame positioned.
The active frame is the last frame you create, unless you change it to
another frame, as described in

Moving Between Frames

Once you've created multiple frames (as described in
Frames), you can modify each frame as necessary for your scan. To
modify a frame—such as resize it, delete it, or select settings for it—it
must be the active frame (indicated by the border with the dotted line).
To select a different frame as the active frame, move the mouse pointer
over the solid border of the inactive frame; the pointer becomes a white
arrow. Click the border; it becomes a dotted line to indicate it is the active
frame.
Moving Between Frames.
active frame border
shown by dotted line
Creating Multiple
Page 26