Epson Expression 800 User Manual page 32

proportional
scale
locked
proportional
scale not
locked
output size
locked
output size
not locked
Basic Scanning
For example, if the original image frame size is 3 inches wide and
4 inches high, and you increase the output width to 4.5 inches (increase
it by half), the height is automatically increased by half to 6 inches.
Proportional scaling is locked as the default setting. To unlock it, click on
the proportional scaling bracket. Then type a new scale factor for the
image height and/or width. The proportions of your image will not be
retained.
Maintaining Output Size
When you need to scan an image to a certain size, you can lock the
output size so it stays the same as you adjust the original frame size or
scale. For example, if you need to scan a photograph so it fits in a
2 3-inch space in a newsletter, enter an output size of 2
lock the output size. SilverFast Lite automatically adjusts the scale
percentage to maintain the output size as you adjust the prescan frame.
1 Enter the width and height you want for your scanned image in the
Output fields as described under
Output Dimensions. Then click the lock icon; it changes to a closed
lock.
2 To maintain the output width and height, move the mouse pointer to
the corner of the prescan frame; the pointer changes to a 4-sided
arrow.
To maintain only the width or the height, move the mouse pointer to
one of the prescan frame's side edges (to maintain the width) or the
top or bottom edge (to maintain the height); the pointer changes to a
2-sided arrow.
Resizing by Manually Entering
3 inches then
Page 32