Gigabyte GA-9ILDR User Manual page 49

COnboard Serial Port 2
BIOS w ill automatically setup the port 2 address.
8Auto
Enable onboard Serial port 2 and set IO address to 3F8.
83F8/IRQ4
Enable onboard Serial port 2 and set IO address to 2F8. (Default v alue)
82F8/IRQ3
Enable onboard Serial port 2 and set IO address to 3E8.
83E8/IRQ4
Enable onboard Serial port 2 and set IO address to 2E8.
82E8/IRQ3
Disable onboard Serial port 2.
8Disabled
CUART Mode Select
Using as standard serial port. (Default v alue)
8Normal
Using as IR and set to IrDA mode.
8IrDA
Using as IR and set to ASKIR mode.
8ASKIR
Using as Smart Card Interface.
8SCR
CUR2 Dupl ex Mode
This entry can be adjust w hen user select [IrDA] in UART Mode Selection.
IR function Duplex Full.
8Full
IR function Duplex Half.
8Half
COnboard Parallel Port
Enable onboard LPT port and set address to 378/IRQ7. (Default v alue)
8378/IRQ7
Enable onboard LPT port and set address to 278/IRQ5.
8278/IRQ5
Enable onboard LPT port and set address to 3BC/IRQ7.
83BC/IRQ7
Disable onboard LPT port.
8Disabled
49
BIOS Setup