Gigabyte GA-9ILDR User Manual page 39

C DRAM Data Integrity Mode
If you are using a Non-ECC DRAM, the mode should to set to Non-ECC and the function is
disabled.
Set DRAM mode at ECC.
8ECC
Set DRAM mode at Non-ECC.
8Non-ECC
CQuick Power On Self Test
This category speeds up Pow er On Self Test (POST) after y ou pow er on the computer. If it is set to
Enable, BIOS w ill shorten or skip some check items during POST.
8Enabled
8Disabled
CBoot Up Fl oppy Seek
During POST, BIOS w ill determine the floppy disk driv e installed is 40 or 80 tracks. 360K ty pe is
40 tracks 720K, 1.2M and 1.44M are all 80 tracks.
BIOS searches for floppy disk driv e to determine it is 40 or 80 tracks. Note
8Enabled
that BIOS can not tell from 720K, 1.2M or 1.44M driv e ty pe as they are all
80 tracks. (Default v alue)
BIOS w ill not search for the ty pe of floppy disk driv e by track number. Note
8Disabled
that there w ill not be any w arning message if the driv e installed is 360K.
CCPU Hyper Threading
8Enabled
8Disabled
Enables quick POST.(Default v alue)
Normal POST.
Enables Hy per-Threading Technology Feature w hen using Window s
XP and Linux 2.4x operating sy stems that are optimized for Hy per-
Threading technology . (Default v alue)
Disables Hy per-Threading Technology w hen using other operating
sy stems.
39
BIOS Setup