Super I/O Device - Gigabyte GA-9ILDR User Manual

GA-9ILDR Motherboard

Super I/O Device

Phoenix -Aw ard WorkstationBIOS CMOS Setup Utility
Adv anced
Super I/O
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
x UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
higf: Mov e Enter: Select +/-/PU/PD: Value
F5: Prev ious Values
Figure 2-2-3: Super I/O Dev ice
COnboard F DC Controller
Select "enabled" to activ e Onboard Floppy Controller. (Default v alue)
8Enabled
Disable this function.
8Disabled
COnboard Serial Port 1
BIOS w ill automatically setup the port 1 address.
8Auto
Enable onboard Serial port 1 and set IO address to 3F8.
83F8/IRQ4
Enable onboard Serial port 1 and set IO address to 2F8.
82F8/IRQ3
Enable onboard Serial port 1 and set IO address to 3E8. (Default v alue)
83E8/IRQ4
Enable onboard Serial port 1 and set IO address to 2E8.
82E8/IRQ3
Disable onboard Serial port 1.
8Disabled
[Disabled]
[3F8/IRQ4]
[2F8/IRQ3]
[Normal]
Half
[378/IRQ7]
[SPP]
3
F10: Sav e
F7: Optimized Defaults F8: Q-Flash
48
Item Help
ESC: Ex it F1: General Help