Page of 72

Gigabyte GA-946GM-DS2 User's Manual

Gigabyte ga-946gm-ds2 motherboards: user guide.
GA-946GM-DS2/S2
Intel
Core
2 Extreme quad-core / Core
®
TM
Intel
Core
2 Extreme dual-core / Core
®
TM
Intel
Pentium
®
®
Intel
Pentium
®
®
User's Manual
Rev. 2002
12ME-946GMDR-2002R
* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste
and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!
* The WEEE marking applies only in European Union's member states.
Processor Extreme Edition /
D / Pentium
4 LGA775 Processor Motherboard
®
2 Quad /
TM
2 Duo /
TM
(rev. 2.0)

   Related Manuals for Gigabyte GA-946GM-DS2

   Summary of Contents for Gigabyte GA-946GM-DS2

  • Page 1

    GA-946GM-DS2/S2 Intel Core 2 Extreme quad-core / Core ® Intel Core 2 Extreme dual-core / Core ® Intel Pentium Processor Extreme Edition / ® ® Intel Pentium D / Pentium ® ® User's Manual Rev. 2002 12ME-946GMDR-2002R * The WEEE marking on the product indicates this product must not be disposed of with user's other household waste and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!! * The WEEE marking applies only in European Union's member states.

  • Page 3

    Gigabyte's prior written permission. Specifications and features are subject to change without prior notice. Product Manual Classification In order to assist in the use of this product, Gigabyte has categorized the user manual in the following: For detailed product information and specifications, please carefully read the "Product User Manual".

  • Page 4: Table Of Contents

    I/O Back Panel Introduction ... 17 Connectors Introduction ... 18 Chapter 2 BIOS Setup ... 29 The Main Menu (For example: BIOS Ver. : GA-946GM-DS2 F1a) ... 30 Standard CMOS Features ... 32 Advanced BIOS Features ... 34 Integrated Peripherals ... 36 Power Management Setup ...

  • Page 5: Table Of Contents

    Chapter 3 Install Drivers ... 49 Install Chipset Drivers ... 49 Software Applications ... 50 Driver CD Information ... 50 Hardware Information ... 51 Contact Us ... 51 Chapter 4 Appendix ... 53 Unique Software Utilities ... 53 4-1-1 EasyTune 5 Introduction ... 53 4-1-2 Xpress Recovery2 Introduction ...

  • Page 6: Item Checklist, Optional Accessories

    Item Checklist IDE Cable x 1 and FDD Cable x 1 SATA 3Gb/s Cable x 2 I/O Shield * The items listed above are for reference only, and are subject to change without notice. Optional Accessories 2 Ports USB 2.0 Cable (Part Number: 12CR1-1UB030-51/R) 4 Ports USB 2.0 Cable (Part Number: 12CR1-1UB030-21/R) SPDIF In and Out Cable (Part Number: 12CR1-1SPINO-11/R) COM Port Cable (Part Number: 12CF1-1CM001-31/12CF1-1CM001-12R)

  • Page 7: Ga-946gm-ds2/ga-946gm-s2 (rev. 2.0) Motherboard Layout

    GA-946GM-DS2/GA-946GM-S2 (rev. 2.0) Motherboard Layout KB_MS ATX_12V BATTERY CLR_CMOS SYS_FAN AUDIO PCIE_16 RTL8111B PCI1 PCI2 CD_IN PCIE_1 CODEC SPDIF_IO REV: 2.0 LGA775 Intel 946GZ ® BIOS COMB - 7 - CPU_FAN SATAII2 SATAII3 Intel ICH7 ® SATAII0 SATAII1 F_PANEL PWR_LED...

  • Page 8: Block Diagram

    Block Diagram CPU CLK+/-(133/200/266 MHz) PCIe CLK LGA775 (100 MHz) Processor Host Interface DDRII 667 /533 MHz DIMM (Note) PCI Express x16 Dual Channel Memory Intel ® 946GZ PCI Express Bus BIOS ATA 33/66/100 IDE Channel PCIe CLK 4 SATA 3Gb/s Intel ®...

  • Page 9: Chapter 1 Hardware Installation, Considerations Prior To Installation

    2. Damage as a result of violating the conditions recommended in the user manual. 3. Damage due to improper installation. 4. Damage due to use of uncertified components. 5. Damage due to use exceeding the permitted parameters. 6. Product determined to be an unofficial Gigabyte product. - 9 - Hardware Installation...

  • Page 10: Feature Summary

    1 COMB connector 2 USB 2.0/1.1 connectors for additional 4 ports by cables 1 power LED connector 1 Chassis Intrusion connector "*" Only the GA-946GM-DS2 adopts All-Solid Capacitor design. GA-946GM-DS2/S2 (rev. 2.0) Motherboard Core 2 Extreme quad-core / Core ®...

  • Page 11

    (Note 3) Some memory configurations will cause DDRII 667 memory to operate at 533 MHz and DDRII 533 at 400 MHz. (Please refer to to Page 15 for more information.) (Note 4) EasyTune functions may vary depending on different motherboards. - 11 -...

  • Page 12: Installation Of The Cpu And Cpu Cooler, Installation Of The Cpu

    Avoid twisting or bending motions that might cause damage to the CPU during installation.) GA-946GM-DS2/S2 (rev. 2.0) Motherboard Fig. 2 Remove the plastic covering on the CPU socket.

  • Page 13: Installation Of The Cpu Cooler

    1-3-2 Installation of the CPU Cooler Fig.1 Please apply an even layer of heat paste on the surface of the installed CPU. Fig. 3 Place the CPU cooler atop the CPU and make sure the push pins aim to the pin hole on the motherboard.Pressing down the push pins diagonally.

  • Page 14: Installation Of Memory

    Memory modules are designed so that they can be inserted only in one direction. The memory capacity used can differ with each slot. GA-946GM-DS2/S2 (rev. 2.0) Motherboard Fig.1 The DIMM socket has a notch, so the DIMM memory mod- ule can only fit in one direction.

  • Page 15

    The GA-946GM-DS2/S2 supports the Dual Channel Technology. After oper- ating the Dual Channel Technology, the bandwidth of Memory Bus will double. The GA-946GM-DS2/S2 includes 4 DIMM sockets, and each Channel has two DIMM sockets as following: Channel 0 : DDRII1, DDRII2...

  • Page 16: Installation Of Expansion Cards

    7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS. 8. Install related driver from the operating system. Installing a PCI Express x16 expansion card: GA-946GM-DS2/S2 (rev. 2.0) Motherboard Please carefully pull out the small white- drawable bar at the end of the PCI Ex- press x16 slot when you try to install/ uninstall the VGA card.

  • Page 17: I/o Back Panel Introduction

    I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). LPT (Parallel Port) The parallel port allows connection of a printer, scanner and other peripheral devices. Serial Port (COMA) Connects to serial-based mouse or data processing devices.

  • Page 18: Connectors Introduction

    Connectors Introduction ATX_12V ATX (Power Connector) CPU_FAN SYS_FAN SATAII0/1/2/3 F_PANEL F_AUDIO GA-946GM-DS2/S2 (rev. 2.0) Motherboard audio jacks can be reconfigured to ) . Please refer to the 2-/4-/6-/8- channel audio setup steps for PWR_LED CD_IN SPDIF_IO F_USB1/F_USB2 COMB CLR_CMOS...

  • Page 19

    1/2) ATX_12V/ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly.

  • Page 20

    FDD drive. The types of FDD drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB and 2.88MB. Before attaching the FDD cable, please take note of the foolproof groove in the FDD connector. GA-946GM-DS2/S2 (rev. 2.0) Motherboard CPU_FAN: Pin No.

  • Page 21

    6) IDE (IDE Connector) An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive).

  • Page 22

    F_PANEL connector according to the pin assignment below. HD (IDE Hard Disk Active LED) SPEAK (Speaker Connector) RES (Reset Switch) PW (Power Switch) MSG (Message LED/Power/Sleep LED) GA-946GM-DS2/S2 (rev. 2.0) Motherboard Speaker Connector Message LED/ Power Power/ Switch...

  • Page 23

    9) F_AUDIO (Front Audio Connector) This connector supports either HD (High Definition) or AC97 front panel audio module. If you wish to use the front audio function, connect the front panel audio module to this connector. Check the pin assignments carefully while you connect the front panel audio module. Incorrect connection between the module and connector will make the audio device unable to work or even damage it.

  • Page 24

    The PWR_LED connector is connected with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode (S1). 11) CD_IN (CD IN) Connect CD-ROM or DVD-ROM audio out to the connector. GA-946GM-DS2/S2 (rev. 2.0) Motherboard Pin No. Definition MPD+...

  • Page 25

    12) SPDIF_IO (S/PDIF In/Out Connector) The S/PDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input function. Use S/PDIF IN feature only when your device has digital output function. Be careful with the polarity of the SPDIF_IO connector.

  • Page 26

    COMB cable. Please contact your nearest dealer for optional COMB cable. 15) CI (Chassis Intrusion, Case Open) This 2-pin connector allows your system to detect if the chassis cover is removed. You can check the "Case Opened" status in BIOS Setup. GA-946GM-DS2/S2 (rev. 2.0) Motherboard Pin No. Definition NDCDB-...

  • Page 27

    16) CLR_CMOS (Clear CMOS) You may clear the CMOS data to its default values by this header. To clear CMOS, temporarily short the two pins. Default doesn't include the jumper to avoid improper use of this header. 17) BATTERY Open: Normal Short: Clear CMOS Danger of explosion if battery is incorrectly replaced.

  • Page 28

    GA-946GM-DS2/S2 (rev. 2.0) Motherboard - 28 -...

  • Page 29: Chapter 2 Bios Setup

    CMOS SETUP screen. You can enter the BIOS setup screen by pressing "Ctrl + F1". If you wish to upgrade to a new BIOS, either Gigabyte's Q-Flash or @BIOS utility can be used. Q-Flash allows the user to quickly and easily update or backup BIOS without entering the operating system.

  • Page 30: The Main Menu (for Example: Bios Ver. : Ga-946gm-ds2 F1a)

    == Select a Boot First device == :Move Enter :Accept ESC:Exit The Main Menu (For example: BIOS Ver. : GA-946GM-DS2 F1a) Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.

  • Page 31

    Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award special enhanced features. Integrated Peripherals This setup page includes all onboard peripherals. Power Management Setup This setup page includes all the items of Green function features.

  • Page 32: Standard Cmos Features

    Allows BIOS to automatically detect IDE/SATA devices during POST(default) None Select this if no IDE/SATA devices are used and the system will skip the automatic detection step and allow for faster system start up. GA-946GM-DS2/S2 (rev. 2.0) Motherboard Standard CMOS Features Fri, Mar 18 2006 18:25:04...

  • Page 33

    Capacity Capacity of currently installed hard disk. Cylinder Number of cylinders Head Number of heads Precomp Write precomp Landing Zone Landing zone Sector Number of sectors Drive A The category identifies the types of floppy disk drive A that has been installed in the computer. None No floppy drive installed 360K, 5.25"...

  • Page 34: Advanced Bios Features

    Enabled Enable HDD S.M.A.R.T. capability. Disabled Disable HDD S.M.A.R.T. capability. (Default value) (Note) This item will show up when you install a processor that supports this function. GA-946GM-DS2/S2 (rev. 2.0) Motherboard Advanced BIOS Features [Press Enter] [Floppy] [Hard Disk] [CDROM]...

  • Page 35

    CPU Hyper-Threading (Note) Enabled Enable CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported. (Default value) Disabled Disable CPU Hyper Threading. Limit CPUID Max. to 3 (Note) Enabled Limit CPUID Maximum value to 3 when use older OS like NT4. Disabled Disable CPUID Limit for windows XP.

  • Page 36: Integrated Peripherals

    If PATA IDE were set to Ch. 0 Master/Slave,this function will auto set to Ch. 1 Master/Slave. USB Controller Enabled Enable USB Controller. (Default value) Disabled Disable USB Controller. GA-946GM-DS2/S2 (rev. 2.0) Motherboard Integrated Peripherals [Enabled] [Auto] Ch.0 Master/Slave Ch.2 Master/Slave Ch.3 Master/Slave...

  • Page 37

    USB 2.0 Controller Disable this function if you are not using onboard USB 2.0 feature. Enabled Enable USB 2.0 Controller. (Default value) Disabled Disable USB 2.0 Controller. USB Keyboard Support Enabled Enable USB Keyboard Support. Disabled Disable USB Keyboard Support. (Default value) USB Mouse Support Enabled Enable USB Mouse Support.

  • Page 38

    Disable onboard LPT port. 378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value) 278/IRQ5 Enable onboard LPT port and address is 278/IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7. GA-946GM-DS2/S2 (rev. 2.0) Motherboard 1.6m - 38 -...

  • Page 39: Power Management Setup

    Parallel Port Mode Using the onboard LPT port as Standard Parallel Port. (Default value) Using the onboard LPT port as Enhanced Parallel Port. Using the onboard LPT port as Extended Capabilities Port. ECP+EPP Using the onboard LPT port as ECP & EPP mode. Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2006 Award Software ACPI Suspend Type...

  • Page 40

    (Default value) Full-On When AC-power back to the system, the system always in "On" state. Memory When AC-power back to the system, the system will return to the Last state before AC-power off. GA-946GM-DS2/S2 (rev. 2.0) Motherboard - 40 -...

  • Page 41: Pnp/pci Configurations

    PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2006 Award Software PCI1 IRQ Assignment PCI2 IRQ Assignment : Move Enter: Select F5: Previous Values PCI1 IRQ Assignment Auto 3,4,5,7,9,10,11,12,14,15 PCI2 IRQ Assignment Auto 3,4,5,7,9,10,11,12,14,15 PnP/PCI Configurations [Auto] [Auto] +/-/PU/PD: Value F10: Save ESC: Exit F6: Fail-Safe Defaults F7: Optimized Defaults...

  • Page 42: Pc Health Status

    Disabled Disable this function. (Default value) CPU/SYSTEM FAN Fail Warning Disabled Disable the fan fail warning function. (Default value) Enabled Enable the fan fail warning function. GA-946GM-DS2/S2 (rev. 2.0) Motherboard PC Health Status [Disabled] 3375 RPM [Disabled] [Disabled] [Disabled] [Enabled]...

  • Page 43

    CPU Smart FAN Control Disabled Disable this function. Enabled When this function is enabled, CPU fan will run at different speed depending on CPU temperature. (Default value) CPU Smart FAN Mode This option is available only when CPU Smart FAN Control is enabled. Auto BIOS autodetects the type of CPU fan you installed and sets the optimal CPU Smart FAN control mode for it.

  • Page 44: Frequency/voltage Control

    Clear CMOS to overcome wrong frequency issue. Memory Frequency (Mhz) The values depend on System Memory Multiplier setting. (Note) This item will show up when you install a processor which supports this function. GA-946GM-DS2/S2 (rev. 2.0) Motherboard Frequency/Voltage Control [16X] [Auto]...

  • Page 45: Load Fail-safe Defaults, Load Optimized Defaults

    Load Fail-Safe Defaults CMOS Setup Utility-Copyright (C) 1984-2006 Award Software Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control ESC: Quit F8: Q-Flash Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance.

  • Page 46: Set Supervisor/user Password

    Setup Menu. If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted only when you try to enter Setup. GA-946GM-DS2/S2 (rev. 2.0) Motherboard Load Fail-Safe Defaults Load Optimized Defaults...

  • Page 47: Save & Exit Setup, Exit Without Saving

    2-11 Save & Exit Setup CMOS Setup Utility-Copyright (C) 1984-2006 Award Software Standard CMOS Features Advanced BIOS Features Integrated Peripherals Save to CMOS and EXIT (Y/N)? Y Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control ESC: Quit F8: Q-Flash Type "Y"...

  • Page 48

    GA-946GM-DS2/S2 (rev. 2.0) Motherboard - 48 -...

  • Page 49: Install Chipset Drivers, Chapter 3 Install Drivers

    Chapter 3 Install Drivers Pictures below are shown in Windows XP. Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the Run.exe.

  • Page 50: Software Applications, Driver Cd Information

    Software Applications This page displays all the tools that Gigabyte developed and some free software, you can choose anyone you want and press "install" to install them. Driver CD Information This page lists the contents of software and drivers in this CD-title.

  • Page 51: Hardware Information, Contact Us

    Hardware Information This page lists all device you have for this motherboard. Contact Us Please see the last page for details. - 51 - Install Drivers...

  • Page 52

    GA-946GM-DS2/S2 (rev. 2.0) Motherboard - 52 -...

  • Page 53: Unique Software Utilities, Easytune 5 Introduction, Chapter 4 Appendix

    Enters the PC Health setting page Confirmation and Execution button Toggles between Easy and Advance Mode Display panel of CPU frequency Shows the current functions status Log on to GIGABYTE website Display EasyTune 5 Help file Quit or Minimize EasyTune 5 software...

  • Page 54: Xpress Recovery2 Introduction

    3. It is recommended that Xpress Recovery2 be immediately installed once you com- plete installations of OS and all required drivers as well as software. GA-946GM-DS2/S2 (rev. 2.0) Motherboard Boot from CD/DVD: <F9>: Xpress Recovery2 - 54 -...

  • Page 55

    2. It is normal that data backup takes longer time than data restoration. 3. Xpress Recovery2 is compliant with the GPL regulations. 4. On a few motherboards based on Nvidia chipsets, BIOS update is required for Xpress Recovery2 to correctly identify RAID and SATA IDE mode. Please contact your motherboard manufacturer.

  • Page 56: Flash Bios Method Introduction

    Updating BIOS with Q-Flash Utility on Dual BIOS Motherboards. Some of Gigabyte motherboards are equipped with dual BIOS. In the BIOS menu of the motherboards supporting Q-Flash and Dual BIOS, the Q-Flash utility and Dual BIOS utility are combined in the same screen.

  • Page 57

    Entering the Q-Flash utility: Step1: To use Q-Flash utility, you must press Del in the boot screen to enter BIOS menu. CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) ESC: Quit...

  • Page 58

    Copy Main ROM Data to Backup Don't Turn Off Power or Reset System Enter : Run After BIOS file is read, you'll see a confirmation dialog box asking you "Are you sure to update BIOS?" GA-946GM-DS2/S2 (rev. 2.0) Motherboard Dual BIOS Utility Main Bios Disable...

  • Page 59

    3. Press Y button on your keyboard after you are sure to update BIOS. Then it will begin to update BIOS. The progress of updating BIOS will be displayed. Please do not take out the floppy disk when it begins flashing BIOS. 4.

  • Page 60

    Press Y on your keyboard to save and exit. Part Two: Updating BIOS with Q-Flash Utility on Single-BIOS Motherboards. This part guides users of single-BIOS motherboards how to update BIOS using the Q-Flash CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Advanced BIOS Features...

  • Page 61

    Exploring the Q-Flash utility screen The Q-FlashBIOS utility screen consists of the following key components. Flash Type/Size...SST 49LF003A Task menu for Q-Flash utility Enter : Run Task menu for Q-Flash utility: Contains the names of three tasks. Blocking a task and pressing Enter key on your keyboard to enable execution of the task.

  • Page 62

    6. Press Del to enter BIOS menu after system reboots and load BIOS optimized defaults. See how to load BIOS optimized defaults, please kindly refer to Step 6 to 7 in Part One. Congratulation!! You have updated BIOS successfully!! GA-946GM-DS2/S2 (rev. 2.0) Motherboard Q-Flash Utility V1.30 Keep DMI Data...

  • Page 63

    Please search for BIOS unzip file, downloading from internet or any other methods (such as: 946GMDS2.F1). Complete update process following the instruction. Utility Fig 2. Installation Complete and Run @BIOS Click Start/ Programs/ GIGABYTE/@BIOS Fig 4. Select the desired @BIOS server - 63 - Appendix...

  • Page 64

    Otherwise, your system won't boot. III. In method I, if the BIOS file you need cannot be found in @BIOS Gigabyte's web site for downloading and updating it according to method II. IV. Please note that any interruption during updating will cause system unbooted.

  • Page 65: Channel Audio Function Introduction

    The default speaker settings for the 6 audio jacks are as shown in the picture to the right. The jack retasking capability supported by HD Audio allows users to change the function for each audio jack by the audio software provided. For example, if a rear speaker is plugged into the center/subwoofer speaker out jack, you can change the center/ subwoofer speaker out jack to fucntion as a rear...

  • Page 66

    Control Panel). Double- click the icon to open the Audio Control Panel. STEP 2: In the Audio Control Panel, click the Audio I/O tab. In the upper left list, click 4CH Speaker. GA-946GM-DS2/S2 (rev. 2.0) Motherboard - 66 -...

  • Page 67

    STEP 3: After plugging in 4-channel speakers to the rear speaker jacks, a small window will pop up and ask you what type of equipment is connected. Choose a device depending on the type of speaker connected (4-channel audio consists of Front Speaker Out (Line Out) and Rear Speaker Out) and then click OK.

  • Page 68

    Choose a device depending on the type of speaker connected (8-channel audio consists of Front Speaker Out (Line Out), Rear Speaker Out, Cen- ter/Subwoofer Speaker Out, and Side Speaker Out) then click OK. The 8-channel audio setup is completed. GA-946GM-DS2/S2 (rev. 2.0) Motherboard - 68 -...

  • Page 69

    Sound Effect Configuration: At the Sound Effect menu, users can adjust sound option settings as desired. AC'97 Audio Configuration: To enable the front panel audio connector to sup- port AC97 Audio mode, go to the Audio Control Panel and click the Audio I/O tab. In the ANA- LOG area, click the Tool icon and then select the Disable front panel jack detection check box.

  • Page 70: Troubleshooting

    Below is a collection of general asked questions. To check general asked questions based on a specific motherboard model, please log on to http://www.gigabyte.com.tw Question 1: I cannot see some options that were included in previous BIOS after updating BIOS. Why? Answer: Some advanced options are hidden in new BIOS version.

  • Page 71

    GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei 231, Taiwan TEL: +886-2-8912-4888 FAX: +886-2-8912-4003 Tech. and Non-Tech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www.gigabyte.com.tw WEB address (Chinese): http://www.gigabyte.tw U.S.A. G.B.T. INC. TEL: +1-626-854-9338 FAX: +1-626-854-9339 Tech. Support: http://rma.gigabyte-usa.com...

  • Page 72

    - 72 -...

This manual also for:

Ga-946gm-s2

Comments to this Manuals

Symbols: 0
Latest comments: