Gigabyte GA-9ILDR User Manual page 45

C On-Chip Serial ATA Setting
4 On-Chip Serial ATA
Auto
8
Combined Mode
8
Enhanced Mode
8
SATA Only
8
Disabled
8
4 Serial ATA Port 0 Mode
Primary Master
8
Primary Slave
8
SecondaryMaster
8
Secondary Slave
8
SATA0 Master
8
SATA1 Master
8
4 Serial ATA Port 1 Mode
Primary Slave
8
Primary Slave
8
SecondaryMaster
8
Secondary Slave
8
SATA0 Master
8
SATA1 Master
8
Auto arrange by BIOS.
PATA and SATA are combined. Max. of 2 IDE drives in each
channel.
Enable both SATA and PATA. Max. of 6 IDE drives are supported.
(Default value)
SATA is operating in legacy mode.
Disable this function.
Set Serial ATA Port 0 as Primary Master. (Default)
Set Serial ATA Port 0 as Primary Slave.
Set Serial ATA Port 0 as Secondary Master.
Set Serial ATA Port 0 as Secondary Slave.
Set Serial ATA Port 0 as SATA0 Master.
Set Serial ATA Port 0 as SATA1 Master.
Set Serial ATA Port 1 as Primary Slave. (Default)
Set Serial ATA Port 1 as Primary Slave.
Set Serial ATA Port 1 as Secondary Master.
Set Serial ATA Port 1 as Secondary Slave.
Set Serial ATA Port 1 as SATA0 Master.
Set Serial ATA Port 1 as SATA1 Master.
45
BIOS Setup