Auto Program (Do A Channel Search) - Zenith L26W56S Installation And Operating Manual

Auto Program (Channel Search)
Use Auto Program to automatically find and store all of
the channels available in the selected Tuning Band.
Notes: Tuning Band must be set before doing the channel search.
See Installer menu item 003 Band/AFC. Default setting is 1, for
CATV. When Auto Program is run, any assigned channel labels are
automatically removed.
With the optional Installer remote control in hand, press
1
the POWER key to turn the TV on.
2
Press the MENU button and then use SELECT button to
select the Channel menu.
3 Press the ENTER button.
Use the SELECT button to highlight Auto Program, then
4
press the ENTER button.
Use the ADJ
5 F / G
the ENTER button.
After finding all available channels, a display appears
showing the number of analog and digital channels
found.
6 Press the MENU button to remove the menu.
Auto Program finds channels being received
by the TV's analog and digital tuners.
Cable will not work unless you subscribe to
a cable service.
button to highlight 'Yes', then press
Antenna
Auto Program
Channel Label
Channel
Channel List
Fine Tune
Signal Strength
--:-- --
--. -- ----
Antenna
Auto Program
Channel Label
Channel
Channel List
Fine Tune
Cable34
Signal Strength
--:-- --
--. -- ----
G
Searching ...
added
30
P A G E 2 1