Zenith L26W56S Installation And Operating Manual page 25

Clock Setup (Continued)
Automatic Time Settings
- If you select auto time setting, time will be set from the digital
broadcast information.
Press MENU and use SELECT button to select the Setup
1
menu.
2 Press the ENTER button.
Use the SELECT button to highlight Time, then press the
3
ENTER button.
Use the SELECT button to highlight Clock, then press
4
the ENTER button.
Use the SELECT button to select Auto Mode, then press
5
the ENTER button.
6
Press the MENU button repeatedly to remove the menu.
Caution: Some digital channels may change the time incorrectly
using the Automatic Clock Set feature.
In this event, the Alarm may not function as intended and the
TV may not turn on at the expected time.
If the end user will have access to the Alarm, it may be best to
use the Manual Clock Set mode and set the clock to local time
manually.
Mini glossary
TIME A four-digit figure broken down into hours and minutes, used to enter the current time when setting the clock or wake-up alarm.
HOURS First two digits that are entered when setting the clock or the wake-up alarm.
MINUTES The last two digits that are entered when setting the clock, or the wake-up alarm.
Time
V-Chip
PC
Setup
Menu Language English
Menu Transparency Transparent
Set ID 96
--:-- --
--. -- ----
Clock Auto
Manual Clock
Daylight Saving Yes
Setup
Time Zone Pacific
On Timer
Off Timer
--:-- --
Auto Off On
--. -- ----
Clock
Manual Clock
Daylight Saving
Setup
Time Zone
On Timer
Off Timer
--:-- --
Auto Off
--. -- ----
G
G
Auto
Manual
P A G E 2 5