Channel Menu Options - Zenith Z15LCD1 Installation And Operating Manual, Warranty

2. MPAA Rating: Select the movie ratings from low to high (alert) - G, PG, PG-13, R, NC-17, X and Off.
3. TV PG Rating: Shown in the figure below:
The empty box refers to unlocked; the solid box refers to locked.
4. Reset to default: Reset to the factory default value.

Channel Menu Options

The following menu appears only in the TV mode.
1. Channel nr: Shows the current channel number.
Channel tuning method: Select "Channel nr", press 100 number button , it will show"--","---","-"("-" stands for
one digital channel,"--"two digital channel,"---" three digital channel),then input the channel number you want.
2. Tuning mode: Select the mode of TV signal - Cable\HRC Cable\IRC Cable\ Broadcast.
3. System standard: NTSC-M.
4. Auto search: Select "Auto Search" to search all signaled channel; when the searching is complete, it
stays at the first channel with signal and all channels that have been located are stored. If you would like
to stop "Auto Search" during the process, simply by pressing the function button.
5. Fine tune: NTSC-M is seldomly used.
6. AFC can be set to ON or OFF. When it is set to ON, the TV will search the TV signal automatically; when
there is any offset in the signal, it will automatically adjust the channel to the correct positon.
7. Skip can be set to ON or OFF. When it is set to ON, a channel can be skipped by pressing the switching
button on the remote control or on the front panel.
8. Lock can be set to on or off,when it is set to on,the current channel is locked.
9. Reset to default: Reset to the factory default value.
Operation
21