Handling Address Search (Ldap) - Konica Minolta bizhub C220 User Manual

How to Use the Authentication Unit
Item
Authentication Type
Referral Setting
Domain Name
3.3.3

Handling Address Search (LDAP)

Use the Fax/Scan screen on the MFP control panel, and press [Address
Search]. The procedures can vary depending on whether a single or multiple
LDAP servers are registered.
Note
If address search (LDAP) setting incorrectly configured properly,
[Address Search] will not appear. Check that the address search (LDAP)
setting is configured correctly.
When a single LDAP server is registered
Press [Begin Authentication] to perform authentication with the Kerberos
authentication ticket and connect to the LDAP server.
After connecting to the LDAP server, select the desired method to search for
the destination.
AU-211P
Description
Select the authentication method to connect to the
LDAP server.
When connecting to the LDAP server using the
Kerberos authentication method, select [GSS-
SPNEGO]. Then specify the domain name of the Active
Directory in [Domain Name].
When specifying the LDAP server with an anonymous
user enabled, you can select [Anonymous].
Select whether to use the referral function. Match the
LDAP server environment.
Specify the domain name to log in to the LDAP server
(up to 64 characters).
3
28