Configuration Before Use; E-Mail; User Box; Smb - Konica Minolta bizhub C220 User Manual

10.1

Configuration before use

10 Administrator Mode Settings
Configure Fax/Scan settings in the Administrator mode.
10.1 Configuration before use
10.1.1

E-mail

Before using E-mail transmission or Internet Fax, configure the following items. This section introduces basic
items. Also refer to the [User's Guide Network Administrator] for details.
- The E-mail address of the administrator
- TCP/IP Setting
- E-Mail TX (SMTP)
d
Reference
For details, refer to the [User's Guide Network Administrator].
10.1.2

User Box

Before saving data in User Boxes, configure the following items. For details on saving data in a User Box,
refer to the [User's Guide Box Operations].
- Create User Box
d
Reference
For details on the procedure for configuring settings for it, refer to the [User's Guide Box Operations].
10.1.3

SMB

Before using SMB transmission, configure the following items. This section introduces basic items. Also refer
to the [User's Guide Network Administrator] for details.
- TCP/IP Setting
- SMB Client Setting
d
Reference
For details, refer to the [User's Guide Network Administrator].
10.1.4

FTP

Before using FTP transmission, configure the following items. This section introduces basic items. Also refer
to the [User's Guide Network Administrator] for details.
- TCP/IP Setting
- FTP Setting
d
Reference
For details, refer to the [User's Guide Network Administrator].
10.1.5

G3 Fax

Before using G3 Fax, configure the following items.
- Header Information
– Refer to page 10-14.
- Line Parameter Setting
– Refer to page 10-17.
bizhub C360/C280/C220
10
10-2