Konica Minolta bizhub C220 User Manual page 216

10.4 Administrator Settings (G3)
Item
[Tray Selection for RX
Print]
[Min. Reduction for RX
Print]
[Print Separate Fax Pag-
es]
[File After Polling TX]
3/3 page
3/3 page (If two units of the Fax Kit FK-502 are installed)
Item
[No. of Sets (RX)]
[Individual Receiving
Line Setup]
[Individual Sender Line
Setup]
bizhub C360/C280/C220
Description
If you want to fix the paper tray used to print received faxes, select the paper
tray.
The available tray types vary depending on the options that are installed.
Specify the reduction ratio for received document to Full Size or a value be-
tween 87 and 96%.
• If the reduction ratio for printing is set to [Full Size], [Print Paper Selection]
and [Tray Selection for RX Print] are set to [Auto]. Or [Print Separate Fax
Pages] is set to [OFF].
If this item is set to ON, a document longer than the standard size is printed
on separate pages.
• [Print Separate Fax Pages] does not appear if [Duplex Print (RX)] is set to
ON.
Specify whether to delete the original after completing polling TX.
Description
Set the number of copies for received documents to any number from 1 to
10 (Default: 1 set.).
Specify whether to configure the RX setting for each line.
Displays if 2 units of the Fax Kit FK-502 are installed.
Specify whether to configure the sender setting for each line.
Displays if 2 units of the Fax Kit FK-502 are installed.
10
10-20