Receiving (G3: With External Telephone Connected); Manual Rx (Dedicated Telephone Line) - Konica Minolta bizhub C220 User Manual

6.2

Receiving (G3: With external telephone connected)

6.2 Receiving (G3: With external telephone connected)
6.2.1

Manual RX (Dedicated telephone line)

It is convenient to set the machine to manual mode if an external telephone is connected to this machine and
the line is primarily used for telephone communication.
Reference
- To use the line dedicated for telephone communication, [Receive Mode] must be set to Manual RX in
[Line Parameter Setting] of the Utility menu.
To receive fax data manually by operating the control panel of this machine, when the external telephone
rings, press [Off-Hook] in the Fax/Scan Mode screen, and make sure [RX] is selected. Press [Start] in the Off-
Hook screen.
To receive fax data manually, the following settings are required.
- External telephone: Connected (Answering machine OFF)
- Line Parameter Setting - Receive Mode: Set to [Manual RX]
bizhub C360/C280/C220
Receiving
The external telephone continues to ring
• A user picks up the phone and talks
6
6-3