Table of Contents
Advertisement
2-2. Connecting the signal cable
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable (FD-C16
enclosed)
Signal Cable (FD-C16
enclosed) + Macintosh
Adapter (Optional)
Digital Input
Signal Cable (FD-C04
enclosed)
NOTE
• The monitor is not compatible with a Power Macintosh G4/G4 Cube ADC
(Apple Display Connector)
2.
Plug the power cord into the power connector on the rear of the
monitor.
Power Cord
Signal Cable
Signal Cable
Connector
Video Output
Connector D-Sub mini
15 pin
Video Output
Connector D-Sub 15
pin
Connector
Video Output
Connector DVI-I
2. CABLE CONNECTION
English
PC
•
Standard graphics card
•
Macintosh G3 (Blue &
White) / G4
•
Macintosh
Macintosh Adapter (Optional)
PC
Digital graphics board
13
Advertisement
Table of Contents
