English
2. CABLE CONNECTIONS
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
• Refer also to the PC user's manual when connecting the monitor.
1.
Rotate the monitor ninety degrees counter-clockwise into the portrait
position.
2.
Connect the signal cable to the DVI-D input connector on the rear of
the monitor and to the video output connector on the PC.
After connecting, secure the cable connectors with the attached screw-in fasteners.
Signal Cable
Signal cable
(FD-C39)
NOTE
• The monitor is not compatible with a color graphics board.
12
2. CABLE CONNECTIONS
Signal cable
FD-C39
Power cord
Connector on PC
Video output connector
PC
Exclusive graphics board
(p.28)