Glossary - Eizo IEC60601-1-1 User Manual

English

9. GLOSSARY

DVI
(Digital Visual Interface)
A digital flat panel interface. DVI can transmit digital data without loss and directly
from the PC using the signal transition method "TMDS" (p.30).
There are two kinds of DVI connectors: the DVI-D connector for digital signal input
only, and the DVI-I connector for both digital and analog signal inputs.
DVI DMPM
(DVI Digital Monitor Power Management)
The Power management system for the digital interface. The "Monitor ON" status
(operation mode) and the "Active Off" status (power-saving mode) are indispensable
for the DVI-DMPM as the monitor's power mode.
LUT
(Look-up table)
Look-up table is the compensation data, to which the monitor refers, when the
monitor outputs the input data from a graphics board. In this model, the "Default*"
adjusted beforehand referring to look-up table at a factory or "Normal", which is in
the state of the characteristic of panel original, (i.e. not adjusted) can be available.
"Custom" automatically stores the customized data after the calibration is performed.
*"Default" is adjusted with the factory default brightness to DICOM grayscale
standard.
Resolution
The LCD panel consists of a fixed number of pixel elements which are illuminated to
form the screen image. The EIZO GS510-BL/CL/BLG/CLG display panel consists of
2048 horizontal pixels and 2560 vertical pixels. At a resolution of 2048 x 2560, all
pixels are displayed as a full screen.
TMDS
(Transition Minimized Differential Signaling)
A signal transition method for the digital interface.
30
9. GLOSSARY