Security - Gateway MT6704h Reference Manual

Security

•
•
•
•
•
70
CHAPTER 6: Traveling with Your Notebook
Get a locking cable for your notebook so you can attach
a cable lock and leave your notebook in your hotel room
while you are away.
Always keep your notebook with you while waiting in
airports, train stations, or bus terminals. Be ready to
claim your notebook as soon as it passes through the
X-ray machine in security checkpoints.
Write down your notebook model number and serial
number (located on the bottom of your notebook) in
case of theft or loss, and keep the information in a safe
place. Also, tape your business card or an address label
to your notebook and accessories.
Whoever sits next to you or behind you can see your
notebook display. Avoid working with confidential files
until you can be sure of privacy.
Use a startup password to restrict access to your
notebook. The startup password is set using the BIOS
utility.
Caution
Use a password that you can remember, but that is difficult for
someone else to guess. The password feature is very secure, with no easy
way to recover a forgotten password. If you forget your password, you
must return your notebook to Gateway for service.
To create a startup password:
1
Restart your notebook. As soon as you see a startup
screen, press F2. The BIOS Setup utility opens.
2
Open the Security menu, highlight Set Supervisor
Password, then press E
instructions. You must set the supervisor password
in order to set the user (startup) password.
Important
You must enter the Supervisor Password each time you use
the BIOS Setup utility.
3
Highlight Set User Password, then press E
follow the instructions. This is the password you need
to enter at startup.
Important
You must enter the User Password each time you turn on your
notebook if it was turned off or put in hibernate mode. You do not
need to enter the User Password if your notebook was put in Sleep
mode.
4
Highlight Password on boot, then press E
and follow the
NTER
and
NTER
.
NTER