Recalibrating The Battery - Gateway MT6704h Reference Manual

6
7
8

Recalibrating the battery

interrupted, you must start the process over again.
If your notebook unexpectedly goes into Sleep mode while you
are using it but the battery charge is not low, you may need
to recalibrate your battery. You should also recalibrate the
battery periodically to maintain the accuracy of the battery
gauge.
To recalibrate the battery:
1
2
3
4
5
6
7
not show an accurate charge, contact Gateway Customer Care at the location
shown on the Customer Care label. For more information, see
information" on page
60
CHAPTER 5: Managing Power
Slide the battery lock to the locked position
Turn your notebook over.
Open the LCD panel.
Important
Do not interrupt the battery recalibration process. If recalibration is
Connect your notebook to AC power and let the battery
charge completely.
As soon as it starts and you see a startup screen, press
F2. The BIOS Setup utility opens.
Open the Advanced menu.
Highlight Battery Auto Learning, then select Enabled
by pressing the spacebar.
Open the Exit menu, highlight Exit Saving Changes,
then press E
NTER
Select Yes, then press E
The battery recalibration process begins and a screen
opens showing you the progress. The entire process
takes several hours.
When the recalibration has finished, the message "Press
[Esc] key to exit" appears.
Press E . The battery charge indicator now displays an
SC
accurate battery charge.
Important
If, after completing this procedure, the battery charge indicator still does
2.
.
.
NTER
.
"Gateway contact