Oki ML8810n Manual Do Utilizador page 66

euc must be used for the printing a text file of the EUC Kanji code
Logical directory
lp
sjis
euc
> jis and euc function only as PostScript printers.
> You can not send data to the root directory.
1. Login to the network interface card.
When printing with ftp, use any values for name and password. However,
if the user name is [root], the password set under TELNET or the utility is
required. See the appropriate section for details.
Example: Logging in with host name ML8810 (or IP address
192.168.20.127).
# ftp ML8810 (or ftp 192.168.20.127
Connected to ML8810
220 EthernetBoard OkiLAN 7120e Ver 01.00 FTP Server
Name (ML8810:<none>) : root
331 Password required.
Password:<CR>
230 User Logged in
ftp>
The network card logical directory structure is hierarchical. Move to the logical
directory; it is not possible to output print data to the root directory.
2. Move to the preferable logical directory using the cd
command.
Example: moving to the lp directory and confirming the current directory.
ftp> cd /lp
250 Command OK.
ftp> pwd
257 "/lp" is current directory
ftp>
3. Configure the transfer mode
There are two types of transfer mode: BINARY mode, in which the file
content is output as it is and ASCII mode, which converts the LF code to
the CR+LF code. If a binary file converted by the printer driver is
transferred, the transfer mode has to be BINARY mode.
Printer function
For direct output
For Shift JIS Kanji converted output
For EUC Kanji converted output
OkiLAN 7120e Network User's Guide
66