Oki ML8810n Manual Do Utilizador page 21

Printer Port Tab
Location
lP Port
euc/sjis Port
Comments
BOJ String
EOJ String
BOJ String
EOJ String
Tab Size
OkiLAN 7120e Network User's Guide
Set an appropriate command
sequence to be sent to the
connected printer before printing job
when data is sent to lp logical printer
port.
Any alphanumeric and following
control characters up to 31
characters can be used:
\bBackspace(0x08)
\tTab (0x09)\nLinefeed(0x0a)
\vVertical tab (0x0b)
\fForm feed (0x0c)
\rCarriage return (0x0d)
\xnnHex code [nn] (0xnn)
\]Double quote (0x22)
\\Backslash (0x5c)
Set an appropriate command
sequence to be sent to the
connected printer before printing job
when data is sent to lp logical printer
port.The available string is the same
as BOJ String.
Set an appropriate command
sequence to be sent to the
connected printer before printing job
when data is sent to euc/sjis logical
printer port.
The available string is the same as lp
Port-BOJ String.
Set an appropriate command
sequence to be sent to the
connected printer after printing job
when data is sent to euc/sjis logical
printer port.
The available string is the same as lp
Port-BOJ String.
Set tab size when data is sent to
sjis/euc logical printer port. The
options available are from 0 to 16
(default 8). The value 0 does not
convert any tabs.
21