Windows 95/98/Me; Windows Nt 4.0 - Oki ML8810n Manual Do Utilizador

Please ensure the NetBEUI protocol has been installed in Windows. This
can be confirmed by checking the network settings. If NetBEUI has not
been installed please refer to the section below.
The relevant Windows installation CD-ROM may be required and you
should follow the on-screen dialogue box prompts.

Windows 95/98/Me

1. Select [Start], [Settings], and [Control Panel].
2. In the Control Panel double-click on the [Network icon].
3. In the Network dialogue box select [Configuration Panel].
4. If [Client for Microsoft Networks] is not listed, click the [Add]
button.
5. In the [Select Network Component Type] dialogue box, select
[Protocol] then the [Add] button.
6. In the [Select Network Protocol] dialogue box, select
[Microsoft] from the list of manufacturers, then select
[NetBEUI] from the list of [Network Protocols] and then click
[OK].
7. The Windows installation CD-ROM may be required. Follow
the remaining dialogue box prompts.

Windows NT 4.0

1. Click the [Start] button, select [Settings] and then [Control
Panel].
1. Double-click the [Network] icon.
2. In the [Network] dialogue box, click the [Protocols] tab.
3. If the [NetBEUI Protocol] is not listed, click the [Add] button.
4. In the [Select Network Protocol] dialogue box, select
[NetBEUI Protocol] and click [OK].
OkiLAN 7120e Network User's Guide
46