Windows 2000; Windows Xp - Oki ML8810n Manual Do Utilizador

Windows 2000

1. Click the [Start] button, select [Settings] and then click on
[Network and Dial-up Connections].
2. Double-click the [Local Area Connection] icon. In the [Local
Area Connection Status] dialogue box, click the [Properties]
button.
3. In the [Local Area Connection Properties] dialogue box, if the
[NetBEUI Protocol] is not listed, click the [Install] button.
4. In the [Select Network Component Type] dialogue box, select
[Protocol] and click the [Add...] button.
5. In the [Select Network Protocol] dialogue box, select
[NetBEUI Protocol] and click the [OK] button.
6. Click the [Close] button in the [Local Area Connection
Properties] dialogue box.
7. Click the [Close] button in the [Local Area Connection Status]
dialogue box.

Windows XP

Although you can install the NetBEUI protocol into Windows XP, it is not
supported. You should be able to use NetBEUI on LAN connections
although you will not be able to use this on a Remote Access Service
Connections.
1. In the [Start] menu, select [Settings] then [Control Panel].
2. Double-click on [Network Connections].
3. Right-click the adapter you wish to add NetBEUI to and then
click [Properties].
4. On the [General] tab, select [Install].
5. Select [Protocol] and then [Add].
6. Select [Have Disk] and insert your Windows XP CD-ROM,
open the Valueadd\msft\net\netbeui folder, click the
OkiLAN 7120e Network User's Guide
47