Oki ML8810n Manual Do Utilizador page 15

Location Comments
Printer Trap By selecting the button, the following dialogue box is
Setup . . . displayed:
In the dialogue box, the following items can be configured:
Printer Trap
Community Name
TCP#1—5
Detail . . .
This community name is assigned to
outgoing printer status traps such as
off-line, paper out, etc.
Set the IP address to which a Trap packet
will be sent. You can set up to five IP
addresses.
In the dialogue box, the following items can
be configured:
Trap Enable
On-line
Off-line
Paper Out
Printer Error
Exit JAM
OkiLAN 7120e Network User's Guide
15
Set sending a Trap
packet, enabled or
disabled, for each
destination.
Set sending a Trap,
enabled or disabled,
when the printer turns
to ON-LINE.
Set sending a Trap,
enabled or disabled,
when the printer turns
to OFF-LINE.
Set sending a Trap,
enabled or disabled,
when paper is out.
Set sending a Trap,
enabled or disabled,
when the printer error
occurs.
Set sending a Trap,
enabled or disabled,
when an Exit JAM
occurs.