Fax Settings - Canon Color imageCLASS MF8170c Facsimile Manual

FAX SETTINGS

Name
1. RECEIVE MODE
FaxOnly
FaxTel
AnsMode
DRPD
Manual
2. USER SETTINGS
1. TEL LINE SETTINGS
1. UNIT TEL NUMBER
2. TEL LINE TYPE
TOUCH TONE
ROTARY PULSE
3. TX START SPEED
4. RX START SPEED
2. UNIT NAME
3. TX TERMINAL ID
1. TTI POSITION
2. TEL NUMBER MARK
4. OFFHOOK ALARM
ON
OFF
5. RX RESTRICTION
OFF
Descriptions
Sets how the machine receives fax and telephone calls.
The machine automatically receives faxes only and the voice calls will be
disconnected.
The machine automatically switches between fax and voice calls. Fax will
be received automatically, and the machine will ring for voice calls.
The machine receives documents automatically and the answering
machine records voice calls.
The machine distinguishes fax and voice calls by using Distinctive Ring
Pattern Detection and lets you know if the call is a fax or voice call.
The connected telephone rings when the machine receives both fax and
voice calls. Fax calls must be answered manually.
The basic operation settings in the Fax mode can be specified.
Specifies the telephone line settings.
Your fax/telephone number can be registered within 20 digits, including
spaces. (See "Registering Your Fax/Telephone Number and Name," on
p. 2-5.)
Selects the telephone line type. (See "Setting the Telephone Line Type,"
on p. 2-6.)
The telephone line is set for touch tone dialing.
The telephone line is set for rotary pulse dialing.
Sets the transmission speed for all documents you send.
33600bps/14400bps/9600bps/7200bps/4800bps/2400bps
Sets the transmission speed for all documents you receive.
33600bps/14400bps/9600bps/7200bps/4800bps/2400bps
You can register your name or your company name within 24 characters,
including spaces. (See "Registering Your Fax/Telephone Number and
Name," on p. 2-5.)
Sets the options for the sender Information.
Selects whether the sender Information is positioned inside or outside
the image area.
OUTSIDE IMAGE: Terminal ID is printed outside the image border.
INSIDE IMAGE: Terminal ID is printed inside the image border.
You can prefix your number with the abbreviations FAX or TEL in your
sender information.
Enables/disables the offhook alarm that alerts you when the handset is
not in the handset cradle.
After reception, the offhook alarm sounds when the handset of extension
telephone is left off the hook.
No offhook alarm.
Sets whether to receive a fax by detecting the TSI (Transmitting
Subscriber Identification) signal, used to identify the sending fax
machine.
All receptions are conducted.
Menu Descriptions 8-3
8