Error Codes - Canon Color imageCLASS MF8170c Facsimile Manual

Error Codes

Errors in reports are recorded as error code numbers because there is not enough
space to print a detailed description of the error in the report. When errors are
recorded in reports, note the error code number, and check it against the table
below to learn more about what caused the error and how to remedy it.
#0005
Cause 1
Remedy
Cause 2
Remedy
7
#0012
Cause
Remedy
#0018
Cause
Remedy
7-4 Error Codes
The other party's fax machine did not respond within 55 seconds.
Send the document again. Contact the other party and have them check their
fax machine. You can try to send the document manually. If you are making an
overseas call, add pauses to the registered number.
The other party is not using a G3 fax machine.
Check with the other party, and send the document to a G3 fax machine. If the
other party does not have a G3 fax machine, try sending your document using a
transmission mode or speed that the other party supports. (See <3. TX START
SPEED> of "Menu Descriptions," on p. 8-3.)
The other fax machine has run out of paper and its memory is full.
Contact the other party, and tell them to refill their paper cassette.
The other fax machine does not answer even after several redialing attempts, or
the other fax machine is busy and did not respond within 55 seconds.
Wait a few minutes and try sending again. If you still cannot send the document,
contact the other party and confirm that the other fax machine has been turned
on. If the other fax machine is busy, try sending your document at a later time.