Digital Rgb Signal Connection - NEC NP-PX700W User Manual

Digital RGB signal connection

• Connect a commercially available HDMI cable between the computer's HDMI output connector and the projector's
HDMI input connector.
• Connect a commercially available DisplayPort cable between the computer's DisplayPort output connector and
the projector's DisplayPort input connector.
HDMI cable (not supplied)
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
HDMI IN
DisplayPort IN
NOTE:
• Turn off the power of the computer and projector before connecting.
• This projector does not support NEC video unit (model ISS-6020) video decoded outputs.
• When a video deck is connected via a scan converter, etc., the display may not be correct during fast-forwarding and
rewinding.
TIP
• The Computer 1 and Computer 2 video input connectors support Windows Plug and Play. The Computer 3 video input connector
does not support Windows Plug and Play.
• A Macintosh signal adapter (commercially available) may be required to connect a Macintosh computer.
To connect a Macintosh computer equipped with a Mini DisplayPort to the projector, use a commercially available Mini DisplayPort
→ DisplayPort converter cable.
DisplayPort IN
HDMI IN
DisplayPort cable (not supplied)
SOURCE button on the projector
cabinet
HDMI
DisplayPort
6. Installation and Connections
Button on the remote control
163
HDMI
DisplayPort