Lens Shifting Range - NEC NP-PX700W User Manual

Lens shifting range

This projector is equipped with a lens shift function for adjusting the position of the projected image by using the LENS
SHIFT ▼▲◀▶ buttons. The lens can be shifted within the range shown below.
Description of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of the pro-
jected image).
NOTE: The lens shift function cannot be used when using the NP16FL (PX750U) and NP06FL (PX700W/PX800X) lens.
Desk/front projection
Ceiling/front projector
Ex.: When using the PX750U to project on a 150" screen
According to the tables of screen sizes and dimensions for 16:10 (→ page 210), H = 323.1 cm, V = 201.9 cm.
Adjustment range in the vertical direction: The projected image can be moved upwards 0.5 × 201.9 cm ≈ 101 cm,
(when the lens is at the center position). For a ceiling/front installation, the above figures are inverted.
Adjustment range in the horizontal direction: The projected image can be moved to the left 0.1 × 323.1 cm ≈ 32 cm,
to the right 0.1 × 323.1 cm ≈ 32 cm.
* Figures differ by several % because the calculation is approximate.
Width of projected image
0.5V
1V
1H
0.1H
0.1H
1H
1V
0.5V
Width of projected image
214
Height of projected image
0.1H
0.1H
Height of projected image
9. Appendix