[Edge Blending] - NEC NP-PX700W User Manual

[EDGE BLENDING]

This function adjusts overlapping edges of images projected from each projector to uniform multi-screen images.
Turns on or off the Edge Blending function. [MODE]
Turning on [MODE] will make [TOP], [BOTTOM], [LEFT], [RIGHT], and [BLACK LEVEL] available. (Default: OFF).
Selects edge of top, bottom, left, and right of the screen to perform the Edge Blending function.
[TOP/BOTTOM/LEFT/RIGHT]
Turning on [CONTROL] will make [MARKER], [RANGE], and [POSITION] available. (→ page 49)
CONTROL �������������� Turns on or off [TOP], [BOTTOM], [LEFT], and [RIGHT]�
MARKER ���������������� Turns on or off a marker for the range and position adjustment� Turning on [MARKER] will display a magenta
marker for [RANGE] and green marker for [POSITION]�
RANGE ������������������� Adjusts the Edge Blending range (width)�
POSITION �������������� Adjusts the Edge Blending start position�
Adjusts the brightness level of 9-segmented portions. [BLACK LEVEL]
9-segmented portions are [TOP-LEFT], [TOP-CENTER], [TOP-RIGHT], [CENTER-LEFT], [CENTER], [CENTER-
RIGHT], [BOTTOM-LEFT], [BOTTOM-CENTER], and [BOTTOM-RIGHT]. (→ page 52)
130
5. Using On-Screen Menu