Adjusting The Vertical Position Of A Projected Image (Lens Shift) - NEC NP-PX700W User Manual

Adjusting the vertical position of a projected image (Lens shift)

CAUTION
NOTE:
• The lens shift function is not available on the projector with NP16FL (PX750U) and NP06FL (PX700W/PX800X) lens installed.
Return the lens shift position to the home position before installing the lens to the projector.
• Shifting the lens to the maximum in two directions combined will cause the edges of the image to become dark or will cause
some shadows.
Adjusting with buttons on the cabinet
1. Press one of the LENS SHIFT ▼▲◀▶ buttons.
2. Use the LENS SHIFT ▼▲◀▶ buttons to move the projected image.
Returning the lens shift position to the home position
Press and hold the SHUTTER/HOME POSITION button for 2 seconds to return the lens shift position to the home
position (nearly center position)
• Perform the adjustment from behind or from the side of the projector. Adjusting from
the front could expose your eyes to strong light which could injure them.
• Keep hands away from the lens mounting portion while the lens shift is in operation.
Failure to do so could result in hands being pinched by the moving lens.
2. Projecting an Image (Basic Operation)
22