Enabling Bluetooth (Cisco Spa525G/525G2) - Cisco Small Business SPA509G Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Bluetooth (Cisco SPA525G/525G2 only)
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
• Switch audio for in-progress calls between your mobile phone and the
Cisco SPA525G2.
• Import your mobile phone address book to your Cisco SPA525G2 personal
address book.
• Use your Cisco SPA525G2 as a "handsfree device" for your mobile phone.
For a list of supported Bluetooth headsets, see this document:
https://supportforums.cisco.com/docs/DOC-9926
For the best possible experience using Bluetooth headsets, upgrade to version
7.4.9 of the firmware using the Bluetooth firmware version 0.00.34.

Enabling Bluetooth (Cisco SPA525G/525G2)

To enable Bluetooth from the configuration utility:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the System tab.
Under Bluetooth Settings, in the Enable BT field, choose yes.
Click Submit All Changes.
To enable Bluetooth from the phone interface:
Press the Setup button.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
With Bluetooth selected, press the Right Arrow key until a blue check mark
appears.
Press Save.
3
80