Single Page; Group Paging; Configuring A Phone To Automatically Accept Pages - Cisco Small Business SPA509G Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Enabling Call Features
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Single Page

A user can directly contact another user by phone. If the person being paged has
configured their phone to automatically accept pages (see
to Automatically Accept Pages, page
connection between the two phones is automatically established when paging is
initiated.

Group Paging

Group Paging lets the user page all the client stations at once, or page groups of
phones. If the client station is on an active call while a group page starts, the
incoming page is ignored.
When paging occurs, the speaker on the paged stations is automatically powered
on unless the handset or headset is being used.
Group page is one-way only. The paged client stations can only listen to the call
from the originator.
To enable paging:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
Under Supplementary Services, under Paging Serv, choose yes.
Click Submit All Changes.

Configuring a Phone to Automatically Accept Pages

To configure a phone to automatically accept pages:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the User tab.
Under Supplementary Services, in the Auto Answer Page field, choose yes.
Configuring a Phone
62), the phone does not ring and a direct
3
62