Configuring Speed Dial - Cisco Small Business SPA509G Administration Manual

Configuring Lines and Extensions
Configuring Lines
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Configuring Speed Dial

In this example, the assistant Bob (extension 200) has another idle line (line 5) on
his Cisco SPA508G. He would like to be able to speed dial his supervisor Mark
(extension 400) from that line.
To configure this feature for Bob's Cisco SPA508G:
Log in to the configuration utility.
Click Admin Login.
Click advanced.
Click the Phone tab.
Find the first line to configure (line 5 in this example):
a. From the Extension
Share Call Appearance
b. From the
c. Enter the following string in the Extended Function field:
fnc=sd;ext=400@$PROXY
Using the following syntax:
fnc=type;ext=extension#@$PROXY
where:
- fnc: function
- sd: speed dial
- ext or usr: extension or user (the usr and ext keywords are
interchangeable)
Click Submit All Changes.
In this example, after this configuration, Bob can press line button 5 to dial Mark's
line.
drop down list, choose Disabled.
drop-down list, choose private.
2
40