Pairing Your Cisco Spa 525G2 With A Bluetooth-Enabled Mobile - Cisco SPA 525G2 User Manual

Pairing your Cisco SPA 525G2 with a Bluetooth-enabled mobile

This feature is based on the following standard Bluetooth profiles:
 Phone Book Access Profile 1.0
 Handsfree Profile 1.5
 Handset Profile 1.1
Note: Not all mobile phones support this function. See the list of Bluetooth-enabled mobile phones
supported with the Cisco SPA 525G2 that is posted at the Cisco support community at
http://www.cisco.com/go/smallbizsupport, and also consult the latest Cisco SPA 525G2 release
notes available at cisco.com.
To pair your Cisco SPA 525G2 with your Bluetooth-enabled mobile phone, you can either initiate pairing
from the Cisco SPA 525G2, or from your mobile phone.
Initiating pairing from the Cisco SPA 525G2
1. Enable Bluetooth as described in the "Enabling Bluetooth section.
2. Press the 'Setup' button.
3. Scroll to User Preferences and press 'Select'.
4. Scroll to 'Bluetooth Configuration' and press 'Select'.
5. Scroll to 'Bluetooth Mode' and press the 'Right Arrow' key to choose one of the following:
Handsfree – Your Cisco SPA 525G2 will operate as a handsfree device with a Bluetooth-enabled
mobile phone.
Both – Your Cisco SPA 525G2 will operate with your Bluetooth-enabled mobile phone or operate
with a Bluetooth headset. (See "Connecting Bluetooth Headsets" section on page 18 for more
information on Bluetooth headsets.)
Note: Your Cisco SPA 525G2 will connect to only one device at a time (either the Bluetooth headset or
the Bluetooth-enabled mobile phone.). If multiple Bluetooth devices are in range of the Cisco SPA
525G2, the order of devices in the 'Bluetooth Configuration > Bluetooth Profiles' list is used, and
the device with a higher priority is activated first.
6. Scroll to 'Bluetooth Profiles' and press the 'Right Arrow' key to enter the profile screen.
7. Press 'Scan' to scan for your mobile phone.
Note: Depending on the network environment (for example, the number of Bluetooth devices and noise
level), your Bluetooth headset may not appear on the found devices list. Ensure the headset is
powered on and has Bluetooth activated, and retry the scan.
8. In the Select a 'Bluetooth Device to Pair' list, select the mobile phone to which you want to pair
and press 'Connect'.
Version 1.5 32 of 47