Business Calls Using Single Phone Number; Procedure; Step 1 - Cisco 7970G User Manual

Business Calls Using Single Phone Number

Change Your PIN Using Change Credentials Service

Procedure

Step 1

Choose
Step 2
Enter your User ID in the User ID field.
Step 3 Enter your PIN in the Current PIN field.
Step 4 Enter your new PIN in the New PIN field.
Step 5 Enter your new PIN again in the Confirm PIN field.
Step 6
Press Change. You see the PIN Change Successful message.
Step 7 Press Exit.
Change Your PIN Using ChangePIN Softkey
Procedure
Step 1
Choose
Step 2 Press ChangePIN.
Step 3 Enter your PIN in the Current PIN field.
Step 4
Enter your new PIN in the New PIN field.
Step 5 Enter your new PIN again in the Confirm PIN field.
Step 6 Press Change. You see the PIN Change Successful message.
Step 7 Press Exit.
Business Calls Using Single Phone Number
Intelligent Session Control associates your mobile phone number with your business phone number. When
you receive a call to your remote destination (mobile phone), your desk phone does not ring; only your remote
destination rings. When an incoming call is answered on the mobile phone, the desk phone displays a Remote
in Use message.
During a call you can also use any of your mobile phone features. For example, if you receive a call on your
mobile number, you can answer the call from either your desk phone or you can handoff the call from your
mobile phone to your desk phone.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
Manager 9.0 (SCCP and SIP)
38
> Change Credentials.
> EM Service.
Calling Features