Replacing The Floppy Disk Drive - HP Kayak XM600 User Manual

Replacing the Floppy Disk Drive

Removing the Floppy Disk Drive
1 Refer to
"Removing the
Front Access
Drive Cage" on
page 36 for
instructions on
removing the
front access cage.
2 Remove the
screws (one
metallic, one
black) on the side
of the drive tray
and remove the
old drive.
3 Remove the
screws from the
drive tray holder.
Installing the Floppy Disk Drive
1 Secure the floppy disk drive to the drive tray holder.
2 Slide the new drive into the cage (with the correct orientation) and
tighten the screws, ensuring that you use the correct screws.
3 Put the front access cage back into the PC. Refer to "Replacing the Front
Access Drive Cage" on page 37 to complete the installation.
2 Installing and Replacing Hardware Parts in Your PC Workstation
black screw
Replacing the Floppy Disk Drive
metallic
screw
39