HP Kayak XM600 User Manual page 51

Check that...
The keyboard cable is correctly connected.
The keyboard is clean and no keys are stuck down.
The keyboard itself is not defective.
If the PC starts but you still have a problem...
The mouse cable is correctly connected.
You are using the correct driver. If you are using HP's mouse, ensure that the
correct driver is installed. This driver is delivered with the HP scrolling mouse
accessory.
The mouse is clean.
The mouse itself is not defective.
If the PC starts but you still have a problem...
The Keyboard Doesn't Work...
The Mouse Doesn't Work...
Check that...
The Power-On Self Test Displays an Error
What to do
Turn on or restart your PC.
When the message Press F2 to enter Setup appears, press the F2 key.
3 Troubleshooting Your HP PC Workstation
Plug the cable into the correct connector on the back of the PC.
Check all keys are at the same height, and none are stuck.
Either replace the keyboard by a known working unit or try the
keyboard with another PC.
Run e-DiagTools. See page 53.
1 Switch off the PC.
2 Plug the cable into the correct connector on the
back of the PC.
Download the latest drivers from HP's web at:
www.hp.com/go/kayaksupport
Clean the mouse ball.
Replace the mouse by a known working unit or try the
mouse with another PC.
Run e-DiagTools. See page 53.
If Your PC Does Not Start Properly
How
How
51