Usb Configuration - Asus M2A-MVP - Motherboard - ATX User Manual

PCI Latency Timer [64]
Allows you to select the value in units of PCI clocks for the PCI device latency
timer register. Configuration options: [32] [64] [96] [128] [16�] [192] [224] [248]
Allocate IRQ to PCI VGA [Yes]
When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for
an IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even
if requested. Configuration options: [Yes] [No]
Palette Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Configuration options: [Disabled] [Enabled]
IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices.
When set to [Reserved], the IRQ is reserved for legacy ISA devices.
Configuration options: [PCI Device] [Reserved]
2.4.6

USB Configuration

The items in this menu allows you to change the USB-related features. Select an
item then press <Enter> to display the configuration options.
Advanced
USB Configuration
Module Version - 2.24.0-11.4
USB Devices Enabled:
None
USB Controller
Legacy USB Support
USB 2.0 Controller Mode
BIOS EHCI Hand-off
v02.53 (C)Copyright 1985-2005, American Megatrends, Inc.
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows None.
ASUS M2A-MVP
BIOS SETUP UTILITY
[USB1.1 and 2.0]
[Enabled]
[HiSpeed]
[Enabled]
Options
Disabled
USB 1.1 Only
USB 1.1 and 2.0
Select Screen
Select Item
+-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
2-27