Chapter 3 W Ireless L An Access Point Configuration; Getti Ng Started - Edimax Wireless LAN Access Point User Manual

C h apt er 3
3.1 Get t in g St ar t ed
This Access Point provi des web-bas ed configuration tool
allowing you to c onfigure fr om wired or wireless stations.
Follow the instructi ons below to get started c onfiguration.
From W ired Station
1. Make sure your wired station is i n the s ame s ubnet with
the Access Point.
The default IP Address and Sub Mas k of the Access Point
is:
Default IP Address: 192.168.2.1
Default Subnet: 255.255.255.0
Configure your PC to be in the same subnet with the
Access Point.
1a) W indows 95/98/Me
1. Click the Start button and sel ect Setti ngs, then clic k
Control Panel. The Control Panel wi ndow will appear.
2. Double-clic k Network ic on. T he N etwork window will
appear.
3. Chec k your list of Network Components . If TCP/IP is not
installed, click the Add button to install it now. If TCP/IP is
installed, go to step 6.
4. In the Network Component Ty pe dialog box, s elect
Protoc ol and clic k Add button.
5. In the Select Network Protoc ol dial og box, selec t
Microsoft and TCP/IP and then click the OK button to
start installing the TCP/IP protocol. You may need your
Windows CD to c omplete the i nstallati on.
6. After ins talling TCP/IP, go bac k to the Network dial og
box. Selec t TCP/IP from the list of
Com ponents and then click the Pr operti es button.
W ir eless L AN AP C onf ig ur ation
W ireless L AN AP Configuration
Network
6