Configuration Too - Edimax Wireless LAN Access Point User Manual

Start IP/End IP
Domai n Name
Leas e Time
Click Apply button at the bottom of the screen to save the
above configurations. You can now configure other advanc e
sections or start using the Access Point.
3.2. 7 C o n f ig u r at io n T o o l
The Configuration Tools screen allows you to s ave (Backup)
the Access Point's current configuration setting. Saving the
configuration settings provi des an added protecti on and
convenienc e s houl d problems occ ur with the Access Poi nt
and you have to res et to factor y default. When you save the
configuration setting (Bac kup) you c an re-load the saved
configuration into the Access Poi nt through the Restore
selection. If extreme problems occ ur you can us e the R estore
to Factor y Default s election, this will set all configurati ons to
its original default s etti ngs (e.g. when you first purchased the
Access Point).
W ireless L AN AP Configuration
You c an designate a particular IP
address range for your DHCP ser ver to
issue IP address es to your LAN Clients.
By default the IP range is from: Start IP
192.168.2.100 to End IP 192.168.2.200.
You c an specify the Domai n Name for
your Acc ess Point.
The DHCP Server when enabled will
temporaril y give your LAN client an IP
address . In the Leas e Time s etting you
can s pecify the time period that the
DHCP Server lends an IP address to
your LAN clients. The DHCP Ser ver will
change your LAN client's IP address
when this ti me thres hold period is
reached.
37