Ii-2. Access Point Mode - Edimax BR‐6428nS V2 User Manual

II‐2. Access Point Mode
1.
Connect the yellow LAN port of your BR‐6428nS V2/nC to the LAN port of
your existing router using an Ethernet cable, then click "Next".
2.
Select "Obtain an IP address automatically" or "Use the following IP
address" for your BR‐6428nS V2/nC. If you are using a static IP, enter the IP
address, subnet mask and default gateway. Click "Next" to proceed to the
next step.
12