Table of Contents
Advertisement
Sound Test
If the configuration setup is completed correctly, you should be able to hear the sound test.
[KEY OPERATION]
Select [Sound Test], then press <ENTER>.
If you cannot hear any sound in the Sound Test, return to the Configuration screen and configure
the setup once again.
Quit Test
To exit M16INIT.
[KEY OPERATION]
Select [Quit Test], then press <ENTER> to exit M16INIT.
Initialization
In case the Sound Edge does not execute or produce sound properly, you may want to
initialize the Opti 82C928.
On the DOS command line, execute the command M16INIT /B to initialize Opti 82C928.
The screen below will appear.
[KEY OPERATION]
CD_\YAMAHA\MAD16 + <ENTER>
M16INIT_/B + <ENTER>
Appendix
69
Advertisement
Table of Contents
